Popular Posts
-
1. Setup the topology as show by simply dragging the devices. 2. Double click on R1 and then switch of... -
Today we are going to do a step by step configuration of Zone-Based Policy Firewall (ZPF). First we will discuss about ZPF and then dive ... -
The Context-Based Access Control (CBAC) feature of the Cisco IOS® Firewall Feature Set actively inspects the activity behind a firewal... -
First we configure R4 as a frame-relay switch with the frame-relay switching command. We then configure the serial interfaces that connec... -
R1 == conf t int ser 0/0 ip add 192.168.12.1 255.255.255.0 no shut exit int loo0 ip add 1.1.1.1 255.255.255.255 no shu... -
Time-based ACLs are types of control lists that allow for network access based on time or day. Time base access-list works with ex...
-
This is what Cisco says about IPsec VPNs. "When a growing organization expands to multiple locations, one of the challenges it faces ... -
This site is created to promote knowledge sharing in the area of computer netowrking but not limited to it. We hereby invite all and sundry ...
-
R1 == conf t int fast 0/0 ip add 192.168.12.1 255.255.255.0 no shut exit int fast 0/1 ip add 192.168.13.1 255.255.255.0 no sh... -
As explained in RFC 2131, Dynamic Host Configuration Protocol , DHCP provides configuration parameters to Internet hosts. DHCP consi...
About Me
- barra2ray
- Dr Barra Touray is a lecturer in Computer Networks at Staffordshire University and an external examiner at Manchester Metropolitan University. He is a certified Fellow of The Higher Education Academy (FHEA) in United Kingdom. He started his research with a commonwealth scholarship at Liverpool John Moores University where he obtained a PhD in Wireless Sensor Networks in the School of Engineering Technology and Maritime Operations. He gained a B.Eng. (Honours) first class in Networks and Telecommunication Engineering from the same University in 2008. He is Cisco certified CCNP Security, CCNP(r&s), CCIP (sp), CCNA Wireless, CCNA Security and CCNA (r&s), with more than 5 years’ experience as a Cisco network Engineer in an ISP. He has also passed the CCIE(r&s) (written exam). He is also Juniper Networks Certificate Associate Junos (JNCIA-Junos) certified. Barra's research interests include energy efficient routing algorithm for wireless sensor networks and Ad hoc networks.
0 comments:
Post a Comment